PlayStation 4 Pro CUH-7200 Wärmeleitpaste tauschen

Geschrieben von: Arty
  • Kommentare: 2
PlayStation 4 Pro CUH-7200 Wärmeleitpaste tauschen

Schwierigkeitsgrad

Mittel

Schritte

0

Zeitaufwand

45 Minuten - 1 Stunde

Einleitung

Hallo zusammen, in dieser Video-Anleitung wird gezeigt, wie man eine PS4 Pro zerlegt, sie von Staub befreit und die Wärmeleitpaste wechselt.

Dies ist die Play Station 4 Pro 2. Generation, Modell: CUH-7200, CUH-7215b, CUH-7216b, und CUH-7217.

Abschluss

Um dein Gerät wieder zusammenzubauen, folge den Schritten dieser Anleitung in umgekehrter Reihenfolge.

Tinte & Feder

Arty

Mitglied seit: 27/10/19

19802 Reputation

2 Kommentare

Not all PS4 Pro models look like this one. Some of them have an X clamp rather than the S clamp. You'll need to adjust some of the advice to fit the way your PS4 Pro is built.

commorancy -

Did this fix, and now my PS4 Pro won't boot. It was working before, but was getting pretty hot (though not overheating) and the fan was running loud. Followed the guide, put it back together, and now it will beep once, show a blue light for a second, and then does nothing. I've tried loosening screws on the back of the APU. I've tried smacking it gently. I've tried a cold start from all residual power being drained. I've ensured all cables are properly connected. Any advice on what could have gone wrong here? I know I didn't fry the motherboard. I work on computers and laptops professionally, but this is just baffling to me.

William Hodge -