Gateway MD2614u Fan Replacement

Geschrieben von: Toni Pipes
  • Kommentare: 0
Gateway MD2614u Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

30 - 45 Minuten

Einleitung

This guide shows you how to replace the fan of your Gateway MD2614u laptop.

  1. GJBrNOTZkkT5ZiVR

    • Place the laptop so the back cover is facing up.

  2. JZIrJlkfyGBMKJMS

    • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

  3. 6XxpB5QCEnhIYtN1

    • Lift off the cover.

  4. nFvSNKJkrpnkO6TV

    • Unplug the fan’s power cable, which is a group of black wires attached to a white plastic head on the motherboard.

    • Pull the plastic part of the cable, not the wires, so that the plug does not break.

  5. BPT33EYSoTHCmBNZ

    • Remove the two screws located on opposite sides of the fan with a Phillips #00 screw driver.

  6. PxDpMSdjVeiuqABQ

    • The fan is permanently attached to the silver heat sink next to the RAM.

    • To completely remove the parts, loosen the heat sink’s four screws with a Phillips #00 screw driver.

    • Take out the screws in the numerical order shown on the heat sink.

  7. qAIYvP2uRG2YW1Et

    • Pull the fan and heat sink toward you at a 20 degree angle upward.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Toni Pipes

Mitglied seit: 05/10/10

333 Reputation

0 Kommentare